(2008 Only) CBR1000RR Accessories - Page 2
Close
Login to Your Account
Honda Pioneer Forums - Powered by vBulletin
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 21 to 40 of 44

Thread: (2008 Only) CBR1000RR Accessories

  1. #21
    lanbrown's Avatar
    Member #
    14037
    Join Date
    05-01-2006
    Posts
    1
    Mentioned
    0 Post(s)
    Rep Power
    0

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by trainedkilla View Post
    I looked at taking the passenger pegs off but that also looks like alot of work!!! lol
    They are, but when you did the FE you were almost half-way there.

  2. #22
    08silvercbr
    Guest

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by trainedkilla View Post
    Thanks...

    The hotbodies undertail was the hardest mod I have done to a bike. Only because they sent me two brackets that were made for the same side. I had to cut a piece out of the original fender section to get my tailight to bolt up. I also had to use my dremel and cut quite a bit to get the undertail to fit correctly.

    Once on, it looks a ton better than stock though.


    I looked at taking the passenger pegs off but that also looks like alot of work!!! lol
    Glad you said that. I actually have my rear light tree off for the track. Wanted to get the hot bodies one...you shouldn't have to do all that cutting crap. Its just a piece of plastic that your breaklight bolts to. If anyone has bought an undertail that fits good right out of the box please post!

  3. #23
    lanbrown's Avatar
    Member #
    14037
    Join Date
    05-01-2006
    Posts
    1
    Mentioned
    0 Post(s)
    Rep Power
    0

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by 08silvercbr View Post
    Glad you said that. I actually have my rear light tree off for the track. Wanted to get the hot bodies one...you shouldn't have to do all that cutting crap. Its just a piece of plastic that your breaklight bolts to. If anyone has bought an undertail that fits good right out of the box please post!
    That is the key though; there is nothing for the light to bolt to!!!!!! They use the stock undertray that you cut to get the mouting brackets on for the light. Take a look:
    http://www.hotbodiesracing.com/installdocs/323.pdf

    I might try the Taylormade FE next; but keep the plate mounting the same as what I have now; the Bike Litez SS kit.

  4. Remove Advertisements
    PioneerForums.com
    Advertisements
     

  5. #24
    08silvercbr
    Guest

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by lanbrown View Post
    That is the key though; there is nothing for the light to bolt to!!!!!! They use the stock undertray that you cut to get the mouting brackets on for the light. Take a look:
    http://www.hotbodiesracing.com/installdocs/323.pdf

    I might try the Taylormade FE next; but keep the plate mounting the same as what I have now; the Bike Litez SS kit.
    The thing is I kinda want to keep all the factory pieces intact for resale. The hotbodies definately looks good all done up. I looked up the taylor made when you mentioned it last, but their undertail is with the undertail exhaust correct? How does the bike lites fit? Still have to fab for the breaklight?

  6. #25
    lanbrown's Avatar
    Member #
    14037
    Join Date
    05-01-2006
    Posts
    1
    Mentioned
    0 Post(s)
    Rep Power
    0

    re: (2008 Only) CBR1000RR Accessories

    The Taylormade has nothing to do with their exhaust as the '08 is not an undertail exhaust. The Taylardame FE replaces everything; break light included. I'm still not 100% sold on the replacement light though.

    The Bike Litez is probably a 90% on the fitment side. Where the stock colored OEM plastic piece comes into contact with the Bike Litez there is a small gap; so I used some door sealant to close the gap. Where the turn signals are on the Bike Litez, there is a small gap. I'm thinking it was to make fitting it easier. The brake light is mounted with double side tape, but it cannot be pulled out of the bike though; even without the tape. The stock bodywork and the FE keep it there.

    I was also able to get an OEM connector so I kept the wiring stock and just have a new plug for the FE.

    If you want to keep things intact, the Hotbodies is not for you. The Bike Litez is probably the best solution right now. The SS mounts the plate to the battery box and you do have to drill holes; two to be exact. That plate location might get you stopped, so the non-SS kit might be the way to go.

  7. #26
    DukeCBR2008
    Guest

    re: (2008 Only) CBR1000RR Accessories

    BikePics - dukecbr2008's 2008 Honda CBR 1000 RR Home Page on BikePics.Com
    scroll down for the AM mods. new pics to follow

  8. #27
    KrazyRdR83
    Guest

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by trainedkilla View Post
    I have the 08 CBR and have done the following mods...

    Slip on Yoshi exhaust, yoshi heat shield, PUIG DB windscreen, No Cut Frame Sliders, HotBodies Undertail, Tinted Headlites, Spiked Windscreen Bolts, spiked bar ends, and tank pad.
    what sliders? and pics of headlights (before/after) possible?

  9. #28
    KrazyRdR83
    Guest

    re: (2008 Only) CBR1000RR Accessories

    haven't really looked at the FE kits...not liking the hotbodies...installed one on my buddies 07 cbr1k, and it wasn't exactly an exact fit

  10. #29
    RR2008
    Guest

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by lanbrown View Post
    You lose low-end power; been tested on a dyno and it showed a loss.

    Wow yes, lose alot low-end power, this happen with a aftermarket muffler too?

  11. #30
    sb1000rr
    Guest

    re: (2008 Only) CBR1000RR Accessories

    nope, mine gained in bottom end with a slipon....

  12. #31
    RR2008
    Guest

    re: (2008 Only) CBR1000RR Accessories

    What slip-on did you have?

  13. #32
    sb1000rr
    Guest

    re: (2008 Only) CBR1000RR Accessories

    yoshi r77

  14. #33
    setanta's Avatar
    Member #
    24378
    Join Date
    09-09-2007
    Posts
    0
    Mentioned
    0 Post(s)
    Rep Power
    0

    re: (2008 Only) CBR1000RR Accessories

    Sb you got a pic cause I was thinking of getting the same one, how does it sound??
    If you are patient in one moment of anger you will save a hundred days of regret

  15. #34
    trainedkilla
    Guest

    re: (2008 Only) CBR1000RR Accessories

    My frame sliders are no cut and they are on the bike in the pics. That pic does not show my tinted headlights but I will post them up soon.

  16. #35
    KrazyRdR83
    Guest

    re: (2008 Only) CBR1000RR Accessories

    ^^^ was wondering how far they stick out (what company did you get the from?)...def would like more pics...thanks

  17. #36
    Razorback
    Guest

    re: (2008 Only) CBR1000RR Accessories

    I´m going for the Evotech Fender Eliminator. Anyone mounted that on your bike?

  18. #37
    Mor
    Guest

    re: (2008 Only) CBR1000RR Accessories

    There are some nice accessories: Rizoma

  19. #38
    bswiggett
    Guest

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by Razorback View Post
    I´m going for the Evotech Fender Eliminator. Anyone mounted that on your bike?
    Have installed the evo-tech fender elim. -- took some time, but look and works great. classy look -- get some small blinkers - stock are way to big for the tidy tail

  20. #39
    bswiggett
    Guest

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by trainedkilla View Post
    I have the 08 CBR and have done the following mods...

    Slip on Yoshi exhaust, yoshi heat shield, PUIG DB windscreen, No Cut Frame Sliders, HotBodies Undertail, Tinted Headlites, Spiked Windscreen Bolts, spiked bar ends, and tank pad.
    who made the no-cut sliders? are they attached to main engine bolt?

  21. #40
    TroyBoy30
    Guest

    re: (2008 Only) CBR1000RR Accessories

    Quote Originally Posted by Mor View Post
    There are some nice accessories: Rizoma
    yea did you look at the prices though!

Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. Big Red accessories
    By sfrankland in forum General Honda Big Red Discussions
    Replies: 2
    Last Post: 07-20-2010, 6:16 AM
  2. BIG RED ACCESSORIES CHEAP!
    By PARTSGUY1 in forum Parts and UTVs For Sale and Trade
    Replies: 1
    Last Post: 03-02-2010, 10:28 PM
  3. Anyone with performance accessories for their Big Red?
    By elchorizo in forum Honda Big Red Performance Modifications
    Replies: 0
    Last Post: 01-13-2009, 11:35 AM

Search tags for this page

08 cbr1000rr accessories

,

2008 cbr 1000rr forum

,

2008 cbr 1000rr frame plugs

,

2008 honda 1000rr modifications

,

2008 honda cbr1000rr accessories

,
2008cbr1000rr accessories on ebay
,
cbr 1000rr tre
,

cbr1000rr 2008 modifications

Click on a term to search our sites for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •