Front Brakes Master Cylinder
Close
Login to Your Account
Honda Pioneer Forums - Powered by vBulletin
Results 1 to 3 of 3

Thread: Front Brakes Master Cylinder

  1. #1
    netphish
    Guest

    Front Brakes Master Cylinder

    I purchased all new stainless brake lines and a whole new modern aftermarket master cylinder brake assembly. Installed and bled the system throughly but still no brakes! During the bleeding process I was unable to build pressure buy pumping the brake with the caliper nipple valve closed. The piston in the master cylinder could be cavetating...but it's brand new!

    The manual says to put a small block behind the brake lever when bleeding. I didn't do this, could that be the prob???? If so, what is the easiest way to fix.

    I need to get this fixed so I can get back on the saddle and cruise!

  2. #2

    Member #
    5024
    Join Date
    07-23-2001
    Posts
    12
    Mentioned
    0 Post(s)
    Rep Power
    0

    Re: Front Brakes Master Cylinder

    If the new lines are filled and you're using the correct bleeding procedure, than I would suspect the aftermarket M/C.

  3. #3
    netphish
    Guest

    Re: Front Brakes Master Cylinder

    Hmm, guess I don't have much choice but to pull it off and inspect.

Similar Threads

  1. 1995 CR125R Cylinder issue
    By andrewjoseph in forum Honda ATV Discussions
    Replies: 4
    Last Post: 05-29-2008, 5:21 AM

Search tags for this page

honda big red brake bleeding

,

honda big red brakes no pressure

,

honda big red front brakes

Click on a term to search our sites for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •