The only thing I can get local is that nasty green e track. Has anyone painted thiers before installation and if so what did you use? I wondering on kind of paint, durability, and if you sanded/sand blasted prior to painting.
Blech....hold out for the galvanized...you'll be happier....
Why don't you just use steel wool?Originally Posted by sheepofblue
No matter what color you paint them, your going to get chipping with use. If you really don't like the color, than get them powdercoated..
Well you guys are help so I think I will go do some RC meditation
Polish them out. I would start with 200 grit, then go to 220, 400, 600, 1200 before breaking out the Nevr Dull and Mothers Mag polish . . .Originally Posted by sheepofblue
But chroming them will make them stronger...Originally Posted by abtech
Last edited by Pete; 05-10-2005 at 10:06 AM.
Only if you chrome the mounting screws at the same time . . .Originally Posted by Pete
Baaaa....I'll make you a billet SS set for around $20-30K....
Overpriced I found some aluminum ones hereOriginally Posted by Baketech
Aluminummm...I thought you had an RC51...
Originally Posted by Baketech
They don't make it in gold to match the premium bikeOriginally Posted by Baketech
Cancel McMaster Carr has grey powder coat and galvanized so they are getting $$
Galvanized is the schizz....
I made mine out of unobtainium. Light, strong, can anodize any color you want.
Kinda like your spine?Originally Posted by tigerblade
Just don't use administratiumOriginally Posted by tigerblade