High Tech Redneck Wheel Chock
Close
Login to Your Account
Honda Pioneer Forums - Powered by vBulletin
Results 1 to 4 of 4

Thread: High Tech Redneck Wheel Chock

  1. #1
    Hammer
    Guest

    High Tech Redneck Wheel Chock

    I wanted a chock system and looked at several but none provided what I wanted and was too expensive. I wanted something that was removable, adjustable and intergrated into the e-track.

    This is what I came up with. I have to raise the e-track in the trailer due to the rhino lining but otherwise the e-track clips will match up perfectly. I plan on putting a pin through the hole in the clip to secure it down to the e-track.

    Parts:
    1....10"X14" 1/4 plate
    2....1" square tubing X14" long
    1....cheap wheelchock
    2....e-track binders
    2.....2"X1/8 strips 10" long
    Total cost each=approx $30

    Tell me your thoughts
    Attached Thumbnails Attached Thumbnails High Tech Redneck Wheel Chock-dscn1333.jpg   High Tech Redneck Wheel Chock-dscn1334.jpg   High Tech Redneck Wheel Chock-dscn1335.jpg  

  2. #2
    sheepofblue
    Guest

    Re: High Tech Redneck Wheel Chock

    Nice work. You might want to add a bad going vertical about half way down for support.

    Also you might covered the back point or make it square to avoid putting a point on your tire.

  3. #3
    Hammer
    Guest

    Re: High Tech Redneck Wheel Chock

    Thought about the support about 1/2 way but once the rear is secured the front tire will not have too much pressure on it. And the plate is big enough that the tire will not contact the e-clip protruding through it.

    That's the way it was on paper anyhow.

  4. Remove Advertisements
    PioneerForums.com
    Advertisements
     

  5. #4
    sheepofblue
    Guest

    Re: High Tech Redneck Wheel Chock

    Quote Originally Posted by Hammer
    Thought about the support about 1/2 way but once the rear is secured the front tire will not have too much pressure on it. And the plate is big enough that the tire will not contact the e-clip protruding through it.

    That's the way it was on paper anyhow.
    The tire will have to roll over the clip though. So it is not critical as would be a resting place but...

Similar Threads

  1. bike grab or Baxley wheel chock
    By fastjester in forum Towing / Transport
    Replies: 6
    Last Post: 06-24-2005, 12:07 PM
  2. A* Tech Back Protector and A* GP Tech Gloves
    By mr_rua in forum Riding Gear / Luggage
    Replies: 2
    Last Post: 06-27-2004, 12:33 AM

Search tags for this page

big red wheel chocks

Click on a term to search our sites for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •