Honda Pioneer Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I am the new owner of a 2010 Big Red, I just love this machine.
I have only one thing that I can't figure out.
The machine goes straight down the road, but my steering wheel is not on center?
Can you remove it and straighten it up, so that is doesn't look like the machine should be turning left when it's going down the road.

Thanks.
 

·
Premium Member
Joined
·
589 Posts
Yes mine was the same way. You can gently pull off the center cap in the middle of the wheel and use a socket wrench to remove the nut. Once the nut is off you should be able to pull the wheel straight off the splined hub and adjust it accordingly. I found that if you drove it at low speed you can stop and fine tune the steering wheel position on the splines to get it just right.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top