Honda Pioneer Forums banner

heated grips

1452 Views 1 Reply 0 Participants Last post by  Joel
G
I'm installing some heated grips using the following type circuit:
http://www.warmnsafe.com/images/Slide2a.JPG

I'm not familiar with the electricals on the 929...is there any place thats better/easier to splice or connect to for the positive,negative and 'power on' (dash light on the schematic)?
1 - 2 of 2 Posts
G
I tied into the low beam of the headlight. The grips I put on draw very little current, so there's plenty of current available on that circuit. Plus it's close.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top